5 Prominent Types of Nylon, Their Uses, and Properties

5 Prominent Types of Nylon, Their Uses, and Properties

Nylon is a versatile family of synthetic polymers known as polyamides (PA). It’s a silk-like re-meltable material typically made from petroleum, capable of producing fibers, films, and various shapes. Nylon is extensively used in commercial and domestic applications.

It’s used in fabric and fibers, including apparel, flooring, and rubber reinforcement. It’s also employed in molded parts for vehicles, electrical equipment, and more.

Nylon is commonly used in films, particularly for food packaging.

Let’s dive deep and learn about the prominent nylon types, their synthesizing process, applications, and many more.

Where Does Nylon Fabric Come From?

Where Does Nylon Fabric Come From

Nylon fabric is derived from petrochemicals. The process involves monomers, usually adipic acid and hexamethylenediamine polymerization, to form a nylon polymer.

The polymer is then passed through an extruder to form pellets or to produce long filaments by passing through spinnerets.

How Many Types of Nylon Are There?

Many types of nylon are based on their basic synthesizing units and other processing operations. Let’s dive deep into the prominent nylon categories.

Nylon 6

Nylon 6

Nylon 6 is a semi-crystalline polyamide. It is produced through ring-opening polymerization, which involves caprolactam, water vapor, and an acid catalyst. This method was discovered by Paul Schlack in 1938.

At the initial stage, caprolactam is heated to around 260°C (533K) in a nitrogen atmosphere. This heat causes the caprolactam ring to break, with water facilitating the ring opening through hydrolysis. The molecular chain continues to grow under low-pressure nitrogen conditions.

The viscosity of the caprolactam gradually transforms from a fluid-like consistency to a honey-like state, resulting in a hot molten polymer.

This molten polymer is then forced through spinnerets into a water quench, where it undergoes rapid cooling and solidification, forming a solid strand. These strands are subsequently cut into granules, producing the final product in a convenient form for further processing.

What Are Nylon 6 Properties and Applications?

What Are Nylon 6 Properties and Applications

Nylon 6 fibers are known for their remarkable toughness, impressive tensile strength, elasticity, and captivating luster. Nylon 6 can be dyed in a wide range of colors. Nylon 6 can withstand temperatures up to an average of 150 °C.

Nylon 6 has many applications across various industries. It has proven valuable in the automotive, electronics, electrotechnical, aircraft, clothing, and medicine sectors.

Nylon 6 exhibits remarkable abrasion resistance. It is resistant to chemicals, including dilute acids and alkalis. It is particularly used in higher-impact applications without requiring high-yield strength.

However, the material has a complicated processing nature, primarily due to its low melt viscosity. Nylon 6 has a high moisture absorption rate, leading to dimensional instability.

Nylon 6/6

Nylon 6/6 is a highly crystalline variant of nylon. Its production involves the combination of hexamethylenediamine with a specific type of dicarboxylic acid.

This chemical reaction gives rise to a salt, which can be either melted to form fibers or subjected to a crystallization process for purification. Nylon 6/6 polymer is one of the earliest fully synthetic polymers.

Its patent was granted to Wallace Carothers in 1935, utilizing amide in its development. This pioneering achievement paved the way for the vast array of applications and advancements we see in synthetic materials today.

What Are Nylon 6/6 Properties and Applications?

What Are Nylon 6-6 Properties and Applications

The material’s order structure results in improved strength and durability. It exhibits enhanced temperature resistance, allowing it to withstand higher temperatures without compromising its integrity. Nylon 6/6 shows lower water absorption rates than the standard variant.

The yield strength of nylon 6/6 is stronger than that of nylon 6. Therefore, it can withstand greater stresses. It exhibits good fatigue resistance, rigidity, high abrasion resistance, and a low coefficient of friction.

Nylon 6/6, like any material, has its share of drawbacks. One of its disadvantages is its high hygroscopicity, meaning it tends to absorb moisture from the environment.

This drawback can lead to reduced impact strength, particularly in dry conditions. Additionally, the molding process for nylon 6/6 can be challenging to control, making it more difficult to achieve precise results.

While it boasts good wear resistance, it is also the most susceptible to UV and oxidative degradation among nylon variants, which can degrade its performance over time.

Nylon 6/6 finds excellent use in applications requiring medium load-bearing capabilities and operating temperatures below 100-120 °C, with minimal or no lubrication. It is highly effective for wear-resistant transmission parts, such as wear pads and guide wheels.

Moreover, due to its suitable properties, nylon 6/6 is widely utilized in injection molding processes. It serves as a good choice as a metal substitute for diecast hand tool bodies, further expanding its range of applications.

Nylon 1,6

Nylon 1,6 is produced by adiponitrile, formaldehyde, and water in acid catalysis in a non-condensation polymerization. The pioneering research on this material occurred at DuPont during the 1950s .

One aspect of nylon synthesis is that it can be produced at room temperature using lab settings.

During the synthesis process of nylon 1,6, it’s important to note that the reaction is exothermic, meaning it releases heat.

Water is added to the reaction mixture to facilitate the precipitation of the nylon 1,6 product. This addition prompts the easy formation of solid particles of the polymer.

These particles can then be separated and purified, producing a high-purity nylon 1,6 polymer. This purification step ensures the quality and integrity of the final product.

What Are Nylon 1,6 Properties and Applications?

The thermal properties of nylon 1,6 depend on the ratio of CH2O (formaldehyde) to adiponitrile utilized during synthesis. The polymer’s melting point rises as the CH2O/adiponitrile ratio increases. This increase is associated with enhanced cross-linking and reduced crystallinity.

Nylon 1,6 absorb relatively high moisture content due to substantial amide residues. As a result, it is not typically employed in fabric applications. In fact, it has been reported to exhibit a higher moisture absorbance than 2-2.5% for nylon 6/6 and nylon 6.

However, nylon 1,6 is not commonly utilized and lacks a specific application or widespread use. Its unique characteristics and properties have limited its practical applications in industries.

Nylon 4/6

Nylon 4,6 is high heat-resistant polyamides or nylon. It derives its name from the two monomers used in its polycondensation process: 1,4-diamino butane (putrescine), which contains four carbon atoms, and adipic acid, which includes six carbon atoms.

During the polymerization reaction, the monomers, adipic acid, and tetramethylene diamine undergo condensation to form the nylon 4,6 polymer.

The resulting polymer exhibits a repeating unit structure of [-OC-(CH₂)₄-CO-NH-(CH₂)₄-NH-]n, with water (H₂O) being released as a byproduct.

What Are Nylon 4/6 Properties and Applications?

What Are Nylon 4-6 Properties and Applications

The primary goal in developing nylon 4/6 was to achieve a higher operating temperature than other nylon grades. This development is attributed to the larger number of amide groups per chain length and the more crystallization facility.

As a result, nylon 4/6 finds applications in engine components like brakes, transmissions, and air cooling systems, where the ability to withstand high temperatures is crucial.

Nylon 4/6 offers several advantages over other nylon grades. It exhibits a higher heat distortion temperature than nylon 6 and 6/6. This higher crystallinity also imparts better chemical resistance, particularly to acidic salts.

Additionally, nylon 4/6 allows for shorter cycle times during processing, contributing to improved productivity.

However, nylon 4/6 shares a similar moisture absorption characteristic with nylon 6/6, although the dimensional increase is relatively minor. It also requires a high processing temperature, which should be considered during manufacturing.

While nylon 4/6 is not commonly used in fabric applications, it finds its place in components that must withstand high temperatures.

Nylon 4,6 is used in electrical connectors, bobbins, gears, bearings, bushings, guides, pump parts, crankshaft saddles, and actuators. Nylon 4/6 often is a viable alternative to metals, thermosets, and expensive thermoplastics like PES, PEI, etc.

Nylon 5,10

Nylon 5,10

Nylon 5,10 is a type of nylon synthesized through condensation reactions involving pentamethylene diamine and sebacic acid. The combination of these two monomers results in the formation of the nylon 5,10 polymer.

Initially, nylon 5,10 was developed as a potential substitute for nylon 6/6. However, its production turned out to be expensive, which hindered its mass production for fabric-related purposes.

Nylon 5,10 exhibits a relatively high melting point, making it a thermally stable material. It can withstand higher temperatures than other nylon varieties before undergoing degradation.

One notable application of nylon 5,10 is in the medical field, where its biocompatibility makes it suitable for devices and materials that come into contact with the human body. This quality allows for its use in various medical applications, contributing to advancements in healthcare.

Nylon 5,10 has limited commercial availability compared to other nylon types. Its specific applications can vary depending on the industry’s requirements and the particular needs of the products being developed.

While the production costs of nylon 5,10 hindered its mass production for fabric purposes, it has found practicaluse in industrial and scientific applications.

Its unique properties and characteristics make it a sought-after material in these specialized fields, driving innovation and progress.

What is the Environmental Impact of Nylon?

What is the Environmental Impact of Nylon

When it comes to decomposing, discarded nylon fabric can take approximately 30 to 40 years. Nylon can be effectively recycled.

In some cases, nylon resin is recycled in a closed-loop system directly at the injection molding machine. This process involves grinding sprues and runners and mixing them with virgin granules, which are then used by the molding machine.

Despite its recyclability, the expense and complexities involved in the nylon recycling process have limited its widespread adoption. Many companies choose to use cheaper, newly-made plastics for their products instead of recycled nylon.

Various types of nylon can release hazardous smoke or ash when exposed to fire. These byproducts contain hydrogen cyanide. Incinerating nylon for energy recovery is usually costly, leading to a significant portion of nylon ending up in landfills, where it slowly decomposes.

How is the Quality of Nylon Determined?

The quality of nylon is determined by several key factors that assess its performance and characteristics. The following points below should consider while evaluating nylon quality.

Strength and Durability

Strength and Durability

It is important to assess mechanical strength, including tensile strength and resistance to wear and tear, to determine nylon quality.

Flexibility and Elasticity

Accessing nylon flexibility and elasticity is crucial, allowing it to recover its shape after deformation. This property ensures the fabric can withstand stretching and bending without permanent damage.



Nylon should demonstrate good colorfastness, meaning its color remains stable and does not fade or bleed when exposed to sunlight, washing, or other environmental factors. This ability ensures that the fabric maintains its aesthetic appeal over time.

Moisture Absorption

This property is required to assess nylon’s ability to withstand high moisture content and keep stable structural properties.

Chemical Resistance

Chemical Resistance

This property should be evaluated to analyze nylon’s ability to withstand exposure to chemicals, oils, solvents, and other potentially damaging substances.

Dimensional Stability

High-quality nylon should maintain its shape and dimensions even after repeated use, washing, or exposure to heat. It should resist shrinking, stretching, or distortion to ensure long-lasting performance.

How Much Does Nylon Fabric Cost?

How Much Does Nylon Fabric Cost

The cost of nylon fabric can vary depending on several factors, such as the type of nylon, the quality of the fabric, the manufacturing process, and the supplier. Market conditions, availability, and demand can also influence the price of nylon fabric.

Generally, nylon fabric is considered to be an affordable synthetic fabric option. It is often less expensive than natural fibers like silk or wool and more expensive than other synthetic fabrics such as polyester.

The cost of nylon fabric can be further influenced by additional factors such as the finishing treatments applied to the fabric, the dyeing process, the brand, and any specialized features or technologies incorporated into the fabric, such as moisture-wicking or antimicrobial properties.

For example, raincoats might include a waterproof layer to increase their weatherproof capabilities. Any further chemical treatment or coating will raise the cost of the cloth.

Which Type of Nylon is Used for Plastic Injection Molding?

Which Type of Nylon is Used for Plastic Injection Molding

Nylon 6, 6/6, and 4/6 are the most commonly used nylons for injection molding. It is worth noting that other types of nylon can also be used, depending on the application’s specific requirements.

Are All Nylon Types Used in Industrial Manufacturing?

Are All Nylon Types Used in Industrial Manufacturing

Some nylons are more suited for industrial applications than others. Various nylon types are available, each with its own set of desirable qualities. Nylon 6, 6/6, and 4/6 are types that find widespread application in industrial settings.

Some other types of nylon, for example, nylon 5,10, is expensive and can’t be used in industrial applications but for scientific and reach application.

Best Plastic Injection Molding and Mold Fabrication Services

Best Plastic Injection Molding and Mold Fabrication Services

At Kemal, our dedication lies in providing top-notch solutions to cater to different applications. We take pride in our team of skilled professionals who operate cutting-edge machinery and advanced software.

We follow industry best practices to ensure each product fulfills your customized requirements.

We offer extensive services, including Plastic Injection Molding, CNC Machining, and Mold Manufacturing. You can access a wide selection of plastic types, all of which can be customized to align with your needs perfectly.

Contact us today and discover Kemal services.


The world of nylon materials is vast and diverse, offering a wide range of options for various applications. We have learned about prominent types of nylon, each with its unique properties and uses.

From the versatile and widely used nylon 6/6 to the high-temperature resistant nylon 4/6, and from the biocompatible nylon 5,10 to the strong and lightweight nylon 6, these materials have revolutionized industries such as automotive, textiles, electronics, and more.

Whether it’s for mechanical strength, chemical resistance, or thermal stability, nylon materials continue to play a crucial role in modern manufacturing.


Nylon’s strength can be attributed to its primary composition, which has an amide linkage. Nylon forms tight, rigid, strong bonds within the nylon structure, resulting in impressive strength.

Polyester outperforms nylon in tern of water resistance. However, it’s important to note that both materials have limitations and are not entirely waterproof.

Nylon has a 2-3% moisture regain, while polyester has a lower moisture regain of 0.4%.

Rinse the fabric with cool water and detergents. Avoid wringing the nylon to prevent any potential damage. With these simple steps, your nylon products look fresh and clean in no time.

Nylon, without chemical treatment and non-toxic additions, is safe to use. However, there are several drawbacks to wearing nylon for lengthy periods.

Sweat buildup, in particular, can lead to skin irritations. Like many synthetic materials, nylon has the potential to release volatile organic compounds (VOCs) through a process known as outgassing.

Put your parts into production today

Content in this article

Request A Quote

*We respect your confidentiality and all information are protected.